[Jewelry making - Article 00738] - Re: [Orchid] [Source] Flexishaft 230v

[JohnCranor]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Brian,

    If Rio Grande won't order a 230 volt flex shaft for you, ckeck other
    places that sell jewelry equipment. For your 1/3hp torquey hang-up
    motor requirements I recommend the Foredom! Remember, you will also
    need the 230 volt foot speed control. Just because Rio Grande won't
    get one for you, don't compromise with another brand of flex shaft. I
    recommend finding a dealer that will order the Foredom you need. 

John
The Jewelry Equipment Dr.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________