The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Inert environment in the kiln  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: James Binnion
Date: Sat Jul 07 22:47:24 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Stainless steel foil is used in the heat treating industry. It is
    available in two types for this use. One is type 321 stainless steel
    and is the least expensive of the two it will work up to 1600 F which
    is above the laminating temperature for most jewelry metals. It comes
    in rols that are 12 or 24 " wide and of varying lengths(10, 25, 50,or
    100 ft). The second type is 309 stainless steel and is good to 2000F
    but quite a bit more expensive. It is quite a bit tougher than
    aluminum foil but you can cut it easily with scissors and it forms
    fairly easily by hand. Use a rawhide or rubber mallet to seal the
    folded edges. A word of warning about the stainless steel foil, it
    is.002 in thick and the edge is like a razor blade, think of paper
    cut on steroids. Always wear cut resistant gloves of leather or
    kevlar when handling the foil to avoid being badly cut. 

    To find it look for "tool wrap" at a machinery supplier like MSC,
    Enco, Travers etc all of which have online sales or my favorite
    McMaster-Carr at mcmaster.com 

Jim

James Binnion
jbin AT mokume-gane.com
James Binnion Metal Arts
http://www.mokume-gane.com
360-756-6550
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2007, The Ganoksin Project