[Jewelry making - Article 00379] - Re: [Orchid] Outdoor booth set up

[Elaine Luther]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Normal table height is not ideal for jewelry, if you can raise your
    displays, that would be great. If you or someone you know can sew,
    you could sew 4 sided table slip covers. Then you can put your bins
    or storage things underneath and they wont' be seen. 

    You should stand, or if you must sit, sit on a barstool height chair
    so you can just slip or glide off, Sitting up from a low chair puts
    a lot of pressure on the customer -- so much effort just to show them
    something -- ack! Now she expects me to buy something! 

Elaine
http://www.CreativeTextureTools.com (TM)
Hard to FInd Tools for Metal Clay
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________