[Jewelry making - Article 00326] - Re: [Orchid] Cutting Titanium

[Holly Gage]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Jesse,

    When I say a massive piece of titanium, I'm not talking sheet metal,
    I'm talking about sculptural free formed rainbow titanium.
    Commercially, you probably have not seen it before, but I have some
    pictures on my site. Most pieces are small, but some pieces are not
    "jeweler" sized and they can be anywhere from a 1/4" thick to an 1"
    thick and that is why I want to cut it more easily. 

    The saw is a Diamond Laser 1000S. The existing blade is definitely
    used and I might need another one soon if not now. I guess I can get
    a new one from the company that makes the machine if I can find them
    -- dealing with the machine itself will be trial and error Thanks
    for the link to the additive!! 

Holly Gage
http://www.HollyGage.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________