[Jewelry making - Article 00256] - [Orchid] Cutting Titanium

[Holly Gage]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi

    I use a lot of sculptural rainbow titanium in my work and sometimes I
    get these massive pieces that I need to cut into smaller pieces which
    could be done with a diamond saw blade. I inherited a band saw for
    cutting stained glass which has a diamond blade, and so I was wonder
    if I could use it to cut the titanium without ruining it. I have no
    intention on using it for glass, so that is not an issue. Your input
    would be so appreciated. 

Holly Gage
http://www.HollyGage.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________