The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Rub over or bezel setting  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Helen Hill
Date: Thu Jul 05 04:48:35 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Brian,

>     Like (herein follows some speculative thinking) say you made a
>     hole in the silver base inside the bezel and made a
>     specially-shaped steel rod to clamp in a vice. The steel rod might
>     have a reduced diameter for a short mm or so to locate into the hole
>     in the silver base and also might have a stepped 'landing' which
>     provides support right under the bezel. The steel could be quite
>     quickly made out of annealed tool steel by putting it in a drill
>     and spinning it while filing/sanding/polishing. Harden/temper then
>     polish. 

    This sounds interesting and worth a try. A friend of mine was round
    the other day and is not a maker of jewellery and she suggested
    something similar, ie. soldering some sort of rod onto the bottom,
    clamp that in the vice, set the stones and then remove the rod. I'll
    re-read your suggestion later to get my head around it and try it
    next time I attempt something similar. 

>     Thicker (fine sil) bezel walls are easier to align properly and
>     therefore to solder well. 

    Again a good suggestion and one I hadn't thought of. I may well
    remake the pendant as I was not entirely happy with that, although
    my daughter loved it. Here is a picture of my daughter on prom night
    wearing the set (pendant, earrings and ring) I made for her. Don't
    look too closely or you'll see mistakes!

    <edit> Attachment Removed </edit>
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project