[Jewelry making - Article 00241] - [Orchid] Bear Valley Ornament

[Dar Shelton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Aloha,

    Here's a link to the Bonny Doon  discussion board, and one of four
    posts I made about a recent job . It is an ornament , a tree about 4"
    tall that has a bear puffed up from the back, and lettering pressed
    into the front . Several new ideas were tried out -and a couple of
    them worked! - on this one . Everything is "handmade" , no cnc , just
    the basic RT/Pancake blanking die , and a good bit of creative metal
    forming with a press , so do try this at home . So, there's the post
    that this links to, and three others , headed "Bear Valley". Enjoy. 

    http://tinyurl.com/ywtfaj 

Dar Shelton SHELTECH
http://www.sheltech.net
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________