[Jewelry making - Article 00148] - Re: [Orchid] Moldy PMC3 Clay

[nick]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I think the polymer is PDLLA so the mould will be similar to the one
    you get on cheese and generally harmless. It will burn off but the
    volume will have changes and I suspect the shrinkage will be uneven
    so it may leave some porosity in your patterns. 

Nick
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________