[Jewelry making - Article 00146] - Re: [Orchid] Moldy PMC3 Clay

[BeadStorm]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Although I haven't had this particular event happen to me, I have had
    mold on reconstituted clay in the past. If it really bothers you, cut
    it away like you did. Otherwise, just work it in and make your item.
    It burns off in the kiln and has no effect on your finished product. 

Sandi Graves, Beadin' Up A Storm
Stormcloud Trading Co (Beadstorm)
http://www.beadstorm.com
Saint Paul, Minnesota USA
651-645-0343
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________