[Jewelry making - Article 00054] - Re: [Orchid] Construction Dilemma

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Tamra, it's not all that difficult, and I'm sure you'll get several
    replies. Solder the sheets first, though, and then solder the bezel.
    My suggestion, though, is to not use the rivets as decorative, if you
    can, use them as rivets. Solder the bezel to the top sheet and rivet
    that all to the bottom sheet, nice and clean, preserve your texture,
    everything. 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________