[Jewelry making - Article 01316] - Re: [Orchid] Rub over or bezel setting

[Karen Goeller]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Helen,

    Just to clarify, I don't use ROUND nose pliers, but FLAT nose pliers
    (there are a variety of widths available, so you can find the ones
    that are just right for what you're doing). 

    The most reliable (but also scariest) method is to use a set of
    chasing punches and a lead-filled mallet to tap the bezels over. You
    can do any size/shape/variation of bezel (unlike bezel punches which
    restrict you to the sizes and shapes created by the manufacturers)
    and you have perfect control over how to shape and smooth the bezel.
    I'd encourage you to explore this technique and develop a comfort
    with it as it will be one you can use in many situations. 

    Good luck - make sure you post a picture when you're done so we can
    all see the end result! 

Karen
No Limitations Designs
Hand-made, one-of-a-kind jewelry
www.nolimitations.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________