[Jewelry making - Article 01287] - Re: [Orchid] Diamond Impregnated Tools

[Mark Zirinsky]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     to make your own lap, if you start with a copper disk, or as
>     others have suggested the batt lap, you can impregnate the surface
>     with diamond by dry sprinkling diamond dust on the surface, and
>     then using a roller to force the powder into the surface. 

    diamond powder is cheap! $1 or so a carat, sized and graded. lasco,
    crystallite, diamond pacific, others 

regards
Mark Zirinsky
denver
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________