The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Laser and Pulse/arc welders  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Joseph Bloyd
Date: Wed Jun 27 06:02:13 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I was reading through the archive posts regarding arc/pulse/ laser
    welders and saw that most of the posts were fairly old with many of
    the responders saying that they had just started using their "new"
    welder, whatever type it was. 

    Now that some time has gone by and also that the laser welder
    companies are coming up with more affordable studio sized versions
    this could be a good time for some current feedback which would be
    helpful for those of us who are trying to decide between the various
    types of welders. 

    Some of the questions that I have are: 

    Is your unit suitable for general bench type repair work including
    prong retipping and silver? 

    Is your unit good for fabrication work? 

    What about the higher powered types of arc welders such as the RDO?
    I imagine they are good for heavy fabrication but what about delicate
    work like retipping? Are they faster than the smaller arc welders
    which fire 1-2 times per second? 

    What is your overall experience with whatever type of unit you use?
    Would you purchase it again? Why? Why not? 

    Have you seen or used newer generation welders that you feel are
    "significant" improvements over the welder that you currently use? 

    Right now I am going back and forth between a laser welder and the
    RDO arc welder. I do repair and fabrication with about 20% in
    silver. I can afford a laser but see no reason to purchase one just
    because I can. 

    Your comments based on your real world experience will be very much
    appreciated by me and no doubt many others who find themselves in
    the same spot. 

Thank you all,

Joseph Bloyd
JNB Studio
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project