The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] What do you use diamond files for?  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Terry Ogden
Date: Tue Jun 12 07:40:20 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Noel

    Depending on grit, I use them for stone, high carbon steel, and
    carbide tooling bits. I have heard that you do not want to use them
    on soft steel and I have not, but it seems it would plug them up if
    you did and I think they would be difficult to clean. 

    I just wet them when used it helps clear the grit of swarf. Seems to
    work ok for me, I use water with tool cool, I don't know if I need
    to, but you know how habits go. I have the same opinion to keep a
    fluid on them, just can't say it is justified by any documentation. 

    When used with carbide, come from the back side of the edge, from
    the front it seems to peal the nickel coating off. I suppose if you
    did not put much pressure on the file it may not, but ruining a file
    once, I have not done it since. Finer grits work well on carbide and
    high carbon steel, such a knife blades and files, not so well on
    rock, or at least it is real slow. Graduated to using power tools a
    while back, and tried the 't' shirt idea Han's gave on the forum once
    when a discussion came up on carving rocks. Worked very well once the
    rough shape is obtained, and less expensive than the felt heads I was
    using before. 

Terry
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project