[Jewelry making - Article 00540] - Re: [Orchid] Ideal vacuum pump specs

[samuel olin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Jattrading, I am using 2 pumps pulling about 6 cfm each to get good
    results your pump should pull at least 15 micron at sea level. I
    would recommend looking for used lab pumps. Mine are Hitachi, but
    Edwards or Alcatel are other names to look for. I found mine online
    1 from Ebay 1 from a google search for vacuum pumps. ( It just
    happend that a fellow in CA had one for sale so on good faith I sent
    him a check and he sent me the pump) 

Best of luck, Sam
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________