The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Eastern Tools  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: hans
Date: Fri Jun 08 05:50:25 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Was: Shop Safety - Proper Dress

Hi, Joe Lovato

    (I said)--- I have a box of junk pliers, motors, drawplates and files
    that were just a waste of money and time. Rio Grande---are you
    listening? 

    Thank you for your response. 

    Firstly, let me apologize for the above statement. 

    Re- reading it, I realize it suggests that my 'box' comes from only
    Rio Grande. 

    That is incorrect. Rio supplies me with excellent products for my
    business and along with Stuller, Gesswein and Hoover and Strong, all
    supply me with most of my needs very professionally....and I have
    said that on several occasions on this forum. 

    That said, I do not live in the USA and so, by default, any order
    will cost me about $100 in transport costs and about 3 weeks lead-in
    time. So any order is always complicated, time consuming and labour
    intensive. Back orders are not an option for me, because of transport
    costs and most orders are spread over several companies at once. 

    And there in lies the rub. My dislike of cheap eastern products. 

    If I receive an order from a supplier, and the order contains a few
    eastern products that are quality defective, I have to absorb those
    costs, and do without them until my next order is placed. (the
    company notwithstanding) 

    Even if the product costs, for instance, $500, my cost is $100 to
    me, then $100 back and then $100 returned to me. This is most
    inefficient in terms of time and money because I bear the return
    transport costs, not the supplying company. Even though they are at
    fault for supplying me a defective product. 

    In my experience, more than 95% of defective products I receive are
    of eastern manufacture. 

    I do not believe that inferior tools produce superior work and I
    stand by what I say--- 

You buy cheap, you buy twice.
Hans Meevis.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project