[Jewelry making - Article 00239] - Re: [Orchid] Silver shoots all over the place

[richard hart]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Ali,

    The cradle that holds the crucible has a metal plate that the spout
    of the crucible goes through, The metal plate must be against the end
    of the flask with the spout inside the flask where the sprue base 
was.
    Perhaps the cradle that holds the flask is in the wrong place, or it
    is to wide. If you need pictures, e-mail me off line. It is not flask
    temp or metal temp that is the problem. 

Richard Hart
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________