[Jewelry making - Article 00235] - Re: [Orchid] Tig Welding

[RMS]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi all, I am going to jump in for a second because we are
    introducing a new welder at SNAG. I have been welding titanium with
    success all this week (Niobium too!). Sterling is harder but it
    appears I will get it worked out. We will still be learning during
    SNAG. Similar to a PUK but enclosed, more power, better shielding,
    ect., etc.. just to let you know it will be there for the curious. 

Bill

Bill, Deborah & Michele
Reactive Metals Studio, Inc
928-634-3434, 800-876-3434, 928-634-6734fx
http://www.reactivemetals.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________