[Jewelry making - Article 00209] - Re: [Orchid] Silver shoots all over the place

[Bruce Holmgrain]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    This may sound dumb. Is this a broken arm casting machine? If so,
    the arm needs to be in the "broken" position at the start of it's
    spin. Otherwise, it will slam into the broken position, spilling
    metal. You might not see it, but I think that you should hear it. 

    Tell us how you solved it. 

Bruce D. Holmgrain
JA Certified Master Benchjeweler
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________