The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Problem soldering  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: James Binnion
Date: Mon Jun 04 05:34:17 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    #3 tips are too small try #5 or #6 tips. 

    Use lots of clean paste flux, clean metal, and clean solder. Heat
    the whole piece with a more attention to the area you wish to solder
    but heat the whole piece. Once you get near soldering temperature
    then focus more on the area to be soldered. Copper is extremely
    thermally conductive and if you only focus on the area you wish to
    solder you will take much longer to bring the work up to soldering
    temperature and burn out the flux and oxidize the work area. You
    should not need to use propane and oxygen solder this size work. You
    are more likely to oxidize the work and burn out the flux with the
    propane/oxygen and again too much spot heating. If you are going to
    use the propane / oxygen rosebud torch use a soft bushy slightly
    reducing flame and again heat the whole piece not just the area you
    are trying to solder. 

    Using A-B adaptors will not affect the amount of heat you get
    substantially. What they are trying to tell you is the whole torch
    system from regulator to torch tip needs to be higher capacity.
    Larger hoses larger, fittings, torch body that can handle higher flow
    rates, regulators with higher flow rates etc. But again you do not
    need this just get a couple of larger air/acetylene tips and
    practice, practice, practice. 

Jim

James Binnion
jbin AT mokume-gane.com
James Binnion Metal Arts
http://www.mokume-gane.com
360-756-6550
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project