The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Silver shoots all over the place  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Seyed Jamal
Date: Sun Jun 03 06:08:29 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi there,

    I'm new to the orchid forums and i just wanted to begin by thanking
    the creators and also the members for this wonderful community. I'm
    a beggining jeweler and i'm just attempting to begin casting. 

    Right now i' just installed my casting machine on a 250 concrete
    base set in wood. When put the flask into the cradle, melt the
    charge and trip the spring the silver always shoots out of the
    either the sides of the casting crucible or the actual flask pops up
    out of place and the silver shoots through the bottom of the
    crucible. 

    First off the area the casting machine is bolted into is level and
    very stable it does not move at all. Its set into a 250 pound
    concrete base and with the pot its in it weighs close to 300 easily.
    The casting machine is one i bought from santa fe jewelers (basic
    buffalo dental casting machine). 

    When the actual silver does go in it forms incomplete castings.
    (some of it shoots off the rest actualy goes in when i tie flask
    down with binding wire). 

    I can't figure out what the problem is. I'm doing everything by the
    book: 2.5 turns, sprues are the correct size, silver is molten to
    where it begins to swirl...etc. I honestly don't have a clue why
    this is happening and i'm losing a lot of silver through this
    process. 

    Any help would be appreciated:) 

thanks
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project