The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Regulator pressure with Smith Silversmith kit  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Thackeray Taylor
Date: Fri Jun 01 06:41:28 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello Shirley, Judy and All,

>     I do not know what pressure the regulator should read for general
>     silver soldering work. 

    The line pressure (left hand gauge) for the acetylene atmospheric
    air torch confused me too. I've owned this torch and sold it for
    many years but it was always with a single gauge regulator telling
    me only the tank pressure, not until recently did Smith Equipment
    start selling it with dual gauges. I have contacted Smith Equipment
    to clarify the proper settings and they recommended that the line
    PSI be set at 12 - 14 for ALL tips on the ACETYLENE ATMOSPHERIC
    torch. Never exceed 15 psi for any acetylene tank. 

>     I believe the correct term for the two gauge regulator is "dual
>     stage regulator". 

    There are two types of regulators most commonly used in our little
    part of the torch world "single stage" and "dual stage" both
    typically have two gauges indicating tank pressure and line delivery
    pressure. The difference between dual stage and single stage is not
    the amount of gauges but the consistency/accuracy in line pressure
    delivery. The dual stage delivering the more accurate consistent
    line pressure, basically two regulators in one. Check out the price
    difference and if you get a chance to look at both close up you'll
    see the dual stage is much bigger in size and cost. 

    Regarding the starting up and shutting down of a torch system.
    Please, please, always follow the manufactures procedures, you'll
    find they match some of the other responses on this forum. 

Sincerely,

Thackeray Taylor
Rio Grande Technical Support
800-545-6566
505-839-3000 ex 13903
technicalsupport AT tbg.riogrande.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project