[Jewelry making - Article 00417] - Re: [Orchid] Little Torch vs. Meco Midget

[Andrew Charvoz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I set the flame the way I want it, get it in position to do the
>     job and the flame has changed and has to be readjusted.

    I have used a meco for many years,and also had this problem at one
    time. The cause was the oxygen regulator. I had the reg ulator
    re-built at a welding supply shop and it solved the problem. You
    might check that possibility.

Andrew
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________