[Jewelry making - Article 00395] - Re: [Orchid] Little Torch vs. Meco Midget

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Also, the torch has valve creep.It has had it since the first time
>     I used the torch. I set the flame the way I want it, get it in
>     position to do the job and the flame has changed 

    It may or may not fix it, but make sure that the nuts under your
    valve knobs - the ones that hold them to the torch body - are tight..

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________