[Jewelry making - Article 00358] - Re: [Orchid] Torch vs. Electromelt

[Jeanne Rhodes-Moen]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I usually only melt what I need per flask, which means the first
    batch takes about 20-30 min, and each successive melt during that
    cast is 5-10 min....which usually gives me just enough time to get
    things ready for the next round and quench the previous flask. 

    My crucible does wear out quickly though, as I am casting at higher
    temps since I'm doing fine work...but the crucibles are not that
    expensive, and well worth it for the advantages of not having to
    coordinate my casting with wielding a blow torch! 

Jeanne
http://www.jeannius.com
http://www.silverthreadsfiligree.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________