[Jewelry making - Article 00142] - Re: [Orchid] [UK Source] Gilding metal sheet

[Peter Bond]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I ordered a sheet of 0.9 x 300 x 300mm gilding metal from A J
>     Reeves some months ago, the cost was around 16. The links are 

    The last time I went hunting for gilding metal (AKA CZ101, CuZn10,
    CW501L etc.) I found a place in Theale near Reading who would sell
    me some... In 8'x4' sheets. This was a little more than I needed at
    the time. 

Peter
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________