[Jewelry making - Article 00112] - Re: [Orchid] More about Jump Ringer

[Thejewelmaker]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Never used a Jump Ringer, but saw a neat little jump ring tool at
    Basel about a dozen years ago, demonstrated by one of the German
    supply houses, As near as I can remember you feed the wire in one
    end, turn the handle and split links fall off the front. You could
    make hundreds in minutes. If you need heaver sizes in production
    quantities there are many European equipment manufactures that make
    coiling and sawing machines. A lot more expensive but worth it for a
    chain making house. Always wonder why more of the great European
    tools never find their way into the US. 

Dennis Smith - thejewelmaker
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________