========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
Dear Carolyn,
I am the inventor and manufacturer of the Jump Ringer system. There
are several copycat versions of them now on the market but none are
as versatile and productive as the Jump Ringer. The standard model
will wind and cut coils of round rings up to 5" (127mm) long. It will
easily cut any of the normal jewelry metals including any alloy of
silver, gold filled, gold (any karat), copper, brass and aluminum
from .016" (0.39mm) up to .080" (2.0mm). Yes, we also produce a set
of 16 different sized steel winding mandrels. If your needs warrant,
we also produce a "Long" or "High Production" version of these with
the same specifications except that 15" (38cm) long coils are machine
wound and cut quite rapidly. We also produce a "MultiShape" Jump
Ringer which will wind and cut oval, square, diamond and triangular
jump rings. The systems use a flexible shaft machine which drives the
saw blade. It is a necessity and the model we recommend is the
Foredom Model SR w/#30 handpiece. These items are depicted very
clearly in Rio Grande's 2006-2007 Tools & Equipment Catalog. You may
contact them at www.riogrande.com
My best,
Ray Grossman
Ray Grossman Inc.
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
