The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Automotive hydraulic die forming  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: MJOAT
Date: Mon Apr 02 06:04:57 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Here is the web site for boony doon's web site.
    http://www.bonnydoonengineering.com/ceilidh/ceilidh.html 

    One must have is the die forming book Hydraulic Die Forming for
    Jewelers and Metalsmiths 

    ~Susan Kingsley it is listed new on amazon right now but you can get
    it from some of the forums supporters or get a used copy. It is a
    must The boony doon forum is also a must for the archives. As far as
    using an A frame or H frame press. The ones from harbor freight type
    stores. Are meant to be used with the size of jack that they are sold
    with. I have a 20 ton unit that I converted to an air over hydraulic
    jack. That works fine for what it is. you can't put a larger jack in
    and not have problems. 

    You will have to make adapters to hold your tooling to the press now
    matter what kind of set up you make. Only if you are getting tooling
    and a press from the same place with it be a put and run type of
    deal. 

    The other thing is using scrap rubber and bits and pieces,can be a
    bad deal lose of time ect experimenting. And then not being able to
    find that exact thing next time you need it. 

    glen 
    been there done that ! 

    I am not a lawyer, and never played one on TV! All the usual and
    standard disclaimers apply. Do not try this at home, use only as
    directed, No warranties express or implied, for the intended use or
    suggested uses, Wear safety glasses, closed course, professionals
    only 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project