[Jewelry making - Article 00028] - Re: [Orchid] Revisiting enamelling on Argentium

[coralnut]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

All,

>     sanded the surface to be enamelled with 220 grit emery paper (to
>     try to remove germanium layer) So maybe the key here for enamelling
>     Argentium 925 is to sand off the germanium. 

    Maybe I'm missing something here.....but, why use AS in enameling
    and then remove the A? Just use fine silver or deplete some 925?

Cheers from Don in SOFL
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________