[Jewelry making - Article 00359] - Re: [Orchid] Sharpening gravers

[Gail M.]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Robb,

    I checked out this machine at HF online. Looks interesting for
    gravers except most laps come with .5" arbors and this machine looks
    to have a small spindle. I wonder if it could be adapted. The rpms
    look good. I would like something inexpensive and motorized to
    sharpen gravers with and used power hones are just about
    non-existant. 

gail
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________