[Jewelry making - Article 00343] - Re: [Orchid] Induction platinum casting machine

[Tim Blades]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I saw one at an exhibition this week. I was particularly impressed
    by it melting and pouring under vacuum, it did not pour from any
    height though,. The samples they had looked good. You do need a good
    water supply, 8CMH vacuum, argon gas supply, and a 16 amp, 240V power
    supply. I was told you could cast in a day because the flasks were
    quite small and burnt out fast. I would like to know if they need
    much maintenance. They have a good video on their site. 

    http://www.indutherm.de/engl/video/video.html 

    I was looking at other dental casters and came across these. 

    http://www.rdoinduction.com/supercast.htm
    http://www.hotplatinum.com/page-index.htm

    Try dental casting suppliers, they seem to be ahead of the game 

regards Tim.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________