[Jewelry making - Article 00243] - Re: [Orchid] Shop trolls

[Reactive Metals]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Doc,

    You might try a shop vacuum with a nylon stocking rubber-banded over
    the end of the hose. You would still get the suction but the diamond
    would then be "stuck" on the hosiery instead of going into the
    vacuum tank. This was a useful tip back in the old days of hard
    contact lenses....Did I just age myself? 

Good Luck!!
Michele

Bill, Deborah, Michele & Sarah
Reactive Metals Studio, Inc
928-634-3434, 800-876-3434, 928-634-6734fx
http://www.reactivemetals.com

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________