The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Titanium soldering grid  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Judy Hoch
Date: Fri Jan 05 06:44:31 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Several months ago we had a discussion of using titanium for
    supports when soldering. 

    For the last 3 years, I have used L shaped pieces of titanium sheet
    to elevate sterling above the soldering board. It doesn't solder to
    the work and doesn't act as a heat sink. The sheet I cut up was about
    24 gauge, cut to 60mm x 8 mm, bent into an L. 

    When I started using argentium, the sag problem which occurs when
    applying bezels is a real nuisance. So I explored using titanium mesh
    of some kind. James Binnion kindly pointed out that titanium has a
    relatively low flash point in mesh with very fine wires. So I went
    looking for expanded metal in titanium. Alan Mason found it first and
    shared half with me. The expanded metal has a cross section of about
    2mm at its thinnest point. I sliced my half into 2 x 3 inch pieces
    and find it superb as a support when working silver and gold. 

    Has anybody else tried it? 

    Judy Hoch - in Colorado with still over a foot of snow in my yard and
    piles five feet high on the street, and more coming tomorrow. How
    about you folks back east with cherry blossoms - want some white
    stuff?
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project