[Jewelry making - Article 00143] - Re: [Orchid] Set of Burs

[Kimberly Starbard]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi John

>     I call them round, but ball is proper. I have a high speed steel
>     set that goes up to about 15mm, but I also have more for everyday. 

    Thank you and thank everyone for the comments on burs. My first
    tendency is to over-buy. I had to back up and think about what I want
    to do. I have decided that a set of round burs would be good for a
    starting point as the first thing I would like to do is try some tube
    setting. Everything looks so nice and fancy in the catalog....it
    would be so easy to get a lot of things I don't need! I went from a
    200 dollar set of burs to about 30 dollars worth of round burs. 

Thanks so much
Kim
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________