The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] I made a Ring display  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: k hung
Date: Tue Jan 02 05:59:49 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I made a very similar ring display a couple of years ago for my
    outside shows after 'losing' a ring. My material list: 4 foot length
    of 2 inch diameter PVC pipe, corresponding PVC pipe cap, 8 inch
    plastic flower pot, cement, 14 inch square piece of plywood. 

    Sink the length of PVC pipe into the center of a cement filled
    plastic flower pot. Attach the PVC pipe cap to the center of plywood
    square with a screw (counter sink the screw). Drill evenly spaced 1/4
    inch holes into the plywood. 

    Assembly & set up: To assemble - fit the cap onto the pipe. You may
    need a rubber mallet to bang the top back off. Set up - Use a
    loosely woven (read that cheap), round tablecloth long enough to
    cover the hanging weights below the tabletop. Cut some metal tubing
    into very short lengths to use as crimps, lead fishing weights and
    fishing line work very well to secure the rings. Attach the weights
    to lengths of fishing line & add a piece of tubing to the line.
    Working from bottom of the table top; thread the fishing line up
    through the hole, through the tablecloth, through the ring shank and
    secure with the crimp (tubing). 

    Be sure to attach enough line for the rings to be tried on - about
    an arm's length. If the weights are heavy enough, when the ring is
    put back down on the table it will reposition back into its original
    spot. One older woman didn't realize that the rings were secured in
    place and literally jumped when the weighted ring 'magically' moved
    back into its place on the table. 

karen
www.khmetalwork.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project