[Jewelry making - Article 01215] - Re: [Orchid] [Looking4] Diamond drag saw blade

[james Bergen]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Mark,

    Have you tried turning the Blade upside down and starting the blade
    with diamond dust in the groove? To answer my own question "yes!".
    Have you thought of having the back of the saw blade fixed like the
    round saws with the diamond attached onto the blade! I have heard of
    this being done but I can't give you a source! It must be a
    reasonable option because in my travels I found people still using
    Drag saws to cut Jade in the outback in Canada a few years ago! I
    would try the Diamond saw retippers (?) and see if they know of
    anyone that could do it! GL
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________