[Jewelry making - Article 01022] - Re: [Orchid] Mill and Lathe setup

[Chris Ploof]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Karl,

    What do you intend to do with the lathe and mill? We use Sherline
    equipment in our studio, and it functions quite well for all sorts
    of materials. If you could let Orchid readers know how you intend to
    use it, I am sure we would all share our opinions! 

CP
Chris Ploof Studio
www.chrisploof.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________