[Jewelry making - Article 00508] - Re: [Orchid] CAD/CAM - What works for you?

[JONLEE]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    For a simpler and cheaper introduction to CAD/CAM, look at 3DWaxMill
    here: 

    http://www.3dwaxmill.com 

    for about $3,500 you get a milling machine, all the CAD CAM software
    you will ever need, and membership in the 3DWaxMill Forum which is
    worth a bunch because there are tons of folks who are most willing to
    help. 

    I bought mine a year ago, and I have NEVER regretted it. 

Jon

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________