[Jewelry making - Article 00177] - Re: [Orchid] [Source] Tap and Die Set?

[Chris Hanson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Kate,

    I bought a nice set from MicroMark's catalog. The set normally runs
    around $100 but they had an internet special for around $80. They are
    a high quality set made in Germany if I recall correctly. I looked at
    sets from "regular" tool suppliers and they were all lacking on the
    small end of the spectrum. 

    Hope that helps! 

    Chris
    Ketchikan, AK

    PS. I have a set of your wax carving tools. They're great! And, I'm
    sorry I missed you when you taught the workshop for AK Metals
    Artists Guild.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________