[Jewelry making - Article 00123] - Re: [Orchid] Working area for heavier tasks

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    for heavier tasks (using disc cutters/ hammering/ anvil/ etc.) Where
    can I obtain a suitable table? 

    I have a Kennedy workbench next to MY workbench. It has all that
    stuff on it. It's a steel bench with configureable drawers and a 1
    1/2" butcher block top. It cost $300 or something as I recall, but
    it's the real thing. They're readily available - look to machinist's
    supplies (we bought ours in a local hardware store) Enco, Travers,
    MSC won't be cheap but they have EVERYTHING. 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________