[Jewelry making - Article 00112] - Re: [Orchid] Working area for heavier tasks

[joels4]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Jamie,

>     I'm slowly setting up workspace for myself. I need a working area
>     for heavier tasks (using disc cutters/ hammering/ anvil/ etc.)
>     Where can I obtain a suitable table? 

    Why not build one. I had similar needs and built a heavy duty table
    using 4X4's for legs with a 1.5" thick top made with two.75" pieces
    of plywood. I would be happy to send you a drawing off line. 

Joel Schwalb
www.schwalbstudio.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________