[Jewelry making - Article 00034] - Re: [Orchid] Wit's end torch problems

[jesse Brennan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    To Shut down Close the torch valve first, ( fire goes out) then shut
    off the cylinder, then back off the regulator. 

    After following these steps bleed the hose by opening the torch
    valve. No big fire out the side of the torch. The prestolite or other
    air fuel torches are very simple to use and have no flame balancing
    adjustments-- they do not produce an oxidizing flame. 

jesse

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________