[Jewelry making - Article 01305] - Re: [Orchid] Mixing Argentium silver and regular silver

[RMS]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Problems like this can be solved with DYKEM LAYOUT FLUIDS. They are
    used in industry to provide a dark field on metal. It goes on very
    thin and is excellent for marking out a design with a sharp point.
    Works great for intricate jewelry design too. Just spray the sheet
    when it arrives. Wipes off with thinner or just let it burn off.
    Comes in spray, liquid and markers. We also mark the reticulating
    side of our Crinkle metal with a rolling rubber stamp and "permanent"
    stamp ink to avoid confusion. 

Bill
Bill, Deborah, Michele & Sarah
Reactive Metals Studio, Inc
928-634-3434, 800-876-3434, 928-634-6734fx
http://www.reactivemetals.com

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________