[Jewelry making - Article 01221] - Re: [Orchid] Mid-size magnetic tumbler

[Phillip Scott]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Magnetic tumblers are very efficient. For tumbling bangle bracelets,
    you will need at least a 6" bowl and preferably a 9" bowl diameter
    to do a good job. If you are working on linked bracelets, the
    smaller 6" diameter bowl will do a good job. The smaller 6" units
    are fine on a up to possibly 30 rings at a time. When you over load
    these units their efficiency goes down and so does the quality of
    your results. The larger the unit, the more items you can tumble at
    a time. 

Phillip Scott G.G.
Technical Support
Rio Grande
1-800-545-6566
technicalsupport AT tbg.riogrande.com

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________