[Jewelry making - Article 00474] - Re: [Orchid] Annealing and Cold Work

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Eg an open bangle that will be bent by the owner to put on the
>     wrist should be finished fully annealed; a closed bangle can be
>     left hardened so that it is stronger and keeps its shape. 

    And rings and ring shanks should always be annealed, unless you have
    some real reason otherwise.. 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________