[Jewelry making - Article 00326] - Re: [Orchid] Tricky Layout

[Wayne Emery]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    That's a simple job in CAD and a simple milling or growing in CAM.
    Call E-Wax, ask for Brant 630-968-6001, fast service, reasonable,
    and CORRECT! He also has the CHEAPEST wax tubes and wax specialty
    products in the USA...and they are either Kindt-Collins or Mattiello
    waxes. Just cheaper than what you are accustomed to, even ones
    milled to correct finger sizes, on-center, and waxes for those huge
    class-type rings.

Wayne
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________