[Jewelry making - Article 00062] - Re: [Orchid] Finding the centre of circle

[Karen Bahr]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Thank you to ALL of you. I received more than a dozen ideas for this
    project and appreciate greatly all the wonderful ideas. Especially
    Jesse Brennan, who emailed me first, allowed me to be able to go
    right out and pick up a handy new tool right away. I found the Centre
    Square to be a wonderful tool and being on sale at Busy Bee Tools for
    $6.99, was also economical. This tool is quick and simple to use.
    This will also make it easy to use for demonstrating. 

    Some of the holes need to be up to 1/8 of an inch in diameter I used
    the centre square to find the hole and drilled the hole, then dapped
    the discs into a half circle where I could then re-drill with a
    larger bit. I do this as to pre-drill a 1/8 hole and then dapping
    caused the hole to warp and then it was too much fiddling to get the
    tubing to fit. 

Karen Bahr
Karen's Artworx
karensartworx AT nucleus.com
Calgary, Alberta, Canada
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________