[Jewelry making - Article 00023] - Re: [Orchid] Stone order in cluster setting

[Brian Corll]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I just did a cluster setting last night - a 14 x 10mm center stone
    (set first) surrounded by 18 2mm accent stones (cornflower blue
    sapphire). The setting is constructed so that the outer edge of each
    accent stone is held in place by a single prong but the inner edge is
    held in place by the center stone above it, with just enough contact
    to make it hold. 

Brian Corll
Brian Corll, Inc.
1002 East Simpson Street
Mechanicsburg, PA 17055
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________