[Jewelry making - Article 01559] - Re: [Orchid] Delicate Bur Work

[Phillip]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     The most inexpensive system for the very high speed turbine
>     carvers is: http://www.turbocarver.com The cutters take a very
>     delicate touch but can do very fine work. 

    I checked the link and had a look. I bought something similar and I
    am still coming to terms with it. If you don't often wear safety
    glasses you surely will. I need to build something into the bench to
    catch the lamel as it comes off fast. You have to watch slipping and
    if you push the burr a way that won't work, it will flip out - like
    driving a F1 car. 

    It looks good and sounds awsome, and if I started working with it
    instead of a pendant motor, I would be better for it. 

    I also looked at the list of burrs and their usefullness (handy).
    Has anybody ever seen a twist drill for a friction grip burr? 

Phil
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________